1000-1043 double layer tile press

The 1000-1043 double-layer tile press combines the two models, with reasonable structure and beautiful appearance. It has the characteristics of space saving and simple operation, and is especially suitable for customers with small site and on-site construction

1000-1043 double-layer tile press is a transformation between high and low racks. The color steel plate with one contour is installed on the low rack, and the roller with another plate type is installed on the high rack. A set of computer control system and a set of hydraulic shearing system are used in production. The appearance of this kind of equipment can save space, shorten the time of replacing two kinds of plates, and improve the output rate, so as to meet the needs of many small and medium-sized color steel enterprises

1000-1043 double-layer tile press is mainly composed of feed introduction platform, forming host, forming shear device, hydraulic station, computer control system, etc

the operation of upper and lower layers is simple. You only need to control each layer through the conversion button on the electric control cabinet, and the power can also control each layer through the clutch

ordinary discharging machine and hydraulic discharging machine are optional

the models of the upper and lower layers are determined according to the customer's requirements

1000-1043 technical parameters of double-layer tile press:

1. The main engine power motor is 380V, three-phase, 60hz

2. The girder is welded with 250mm H section steel

3. The thickness of the middle plate is 14mm

4. The sprocket chain is 1 inch

5. Journal 70mm

6. The power unit adopts 4#3kw planetary cycloid reducer

7. The number of forming rows is 11 and 9

8. Hydraulic pump power motor 3KW

9. The computer PLC is delta brand. The shear head is welded with steel plate