Use and maintenance of double-layer tile press

For the use and maintenance of double-layer tile press, the double-layer tile press equipment should not only be able to use, but also be able to maintain. Proper maintenance can prolong the service life of tile press equipment. At ordinary times, we should pay attention to the operation process of the tile press equipment in the process of use to see whether it is the same as the previous operation and whether there is any difference. If there is, we should make sure to check the reason and solve the problems in time. We need to regularly check whether all parts are stable, and clean all parts frequently, especially the oil tank and oil filtering equipment, to keep the oil pipe smooth

in the process of using the color steel equipment, we must pay attention to the operation of the tile pressing machine. If we find a problem, we must solve it. Don't think that the problem is small and don't solve it. Sometimes small problems will also lead to major faults. For the maintenance of the tile press, a plan should be made to achieve regular maintenance. The maintenance of the double-layer tile press has played a great role in prolonging the service life of the tile press. Users of tile press must not underestimate the importance of maintenance of tile press

first, clean the surface of the double-layer tile pressing machine. The upper die stamping process of the machine: the motor drives the input shaft through the belt pulley, drives the upper shaft through the pinion and big gear, and drives the sliding seat equipped with the upper die up and down through a set of cam mechanism to realize tile pressing

the indexing of the worktable of the double-layer tile press is realized by the gear set installed at the end of the upper shaft, driving the shift pin gear, and shifting the grooved wheel installed on the hexagonal runner shaft to achieve indexing positioning. At both ends of the upper shaft, there is a return cam conjugate with the pressing cam installed on the same shaft, and the accurate positioning of the lower die in the working position is realized through the positioning rod and positioning disc. Lubrication pumps are installed in the boxes on the left and right sides. When the machine is working, the oil pipes deliver lubricating oil to all friction moving parts. Those who understand the structure, performance and operating procedures of the machine shall not start the machine

the double-layer tile press is strictly prohibited to work beyond the small closing height, that is, the small distance between the bottom surface of the upper sliding box and each working surface is 290 mm. The height behind the upper and lower mold is required to be added, and the thickness of the upper and lower base plates plus the thickness of the tile blank is not allowed to exceed 290 mm. The mold should be designed according to this requirement to avoid machine tool accidents. When the tile material in the double-layer tile press falls between the blades of the receiving section reamer by its own weight, the receiving section reamer will convey the tile material to the conveying section reamer, that is, into the tile cylinder. However, because the upper part of the reamer in the receiving section of the tile press is open, under the rotation of the reamer, part of the tile material is thrown away along the tangent direction of each point of the upper part of the calibrating tool and adhered to the right wall of the receiving box. The greater the plasticity of the tile material, the more serious the adhesion phenomenon, and the more the adhered tile material accumulates, until the tile material is put up above the reamer in the receiving section, so that the tile material cannot enter between the blades of the reamer in the receiving section. For the two-stage vacuum tile press, the tiles of the main product are constantly entering the vacuum box. If the scaffolding is serious, the vacuum box will be blocked, and the vacuum tile press will stop working. The tile pressing device is set up to eliminate the above phenomenon. Another function of the tile pressing device is to force the tile material down within its rotation range, so as to speed up the speed of the tile material entering the receiving reamer