Use of angular tile press

Jiaochi tile pressing machine is widely used in the top floor and wall constructed by light steel layout. The goods have the characteristics of bright color and do not need secondary decoration. Check whether the soft sling has the appearance of tearing and cutting during each hoisting. The probe should be avoided when the floor bearing plate of the angle galloping tile press is placed on the steel beam

use of angle slip pressing machine:

1. Electricians abide by the contract, know the varieties and functions of electrical lines and electrical equipment in the workshop, and do not fully know the functions of electrical equipment, so it is forbidden to take risks in homework

2. Electricians should check the status of cables, motors, electric consoles and other equipment on schedule day by day, find the title in the check, abide by the contract and deal with it in time. When checking the temperature of the motor, first check that there is no electricity, and then test with the back of your hand

3. Except for temporary construction electricity or temporary methods, do not erect temporary wires, do not hang lamps disorderly, and the original electrical circuits of switches and sockets used for external things and electric welding machines shall not be changed privately

4. Check and maintain the electrical equipment as scheduled according to the regulations, and remove unnecessary electrical equipment lines

5. For some power-off operations, when the adjacent electrical body is less than 0.9 meters away from the inspection staff, dry wood rubber or insulating materials must be used as a solid temporary shelter

6. When using electric things, there is anti electric shock maintenance

7. When using the ladder, the viewpoint between the ladder and the situation should be 60 degrees. When using the ladder in the cement situation, there should be a sliding method, and someone should hold the ladder

8. When it is found that any conductive part of the angular galloping tile press is grounded, it is not allowed to approach unless the power supply is blocked. It is separated from the adjacent area by 4 meters and 1.8 meters indoors, so as to avoid step voltage damage

9. When repairing the equipment, pull down the switch and knife switch, abide by the contract, hang the warning sign of "stop the contract, someone works" at the switch and knife switch, hang the warning sign of "stop, high voltage risk" on the barrier of live equipment and the aisle where passage is stopped, and hang the warning sign of "work here" at the operation site