Type C machine

C-type machine, also known as C-type steel machine, is composed of feeding rack, feeding and guiding platform, leveling device, forming host, punching device, flying saw cutting device, hydraulic station, computer control cabinet, etc. The finished C-shaped purlin rolled by the C-shaped steel forming machine has good bending and compression resistance, good flatness, full-automatic fixed length cutting, automatic punching, good automation and convenient installation. The product can be used as the main stress-bearing structure of large and medium-sized industrial and civil buildings, such as roof load-bearing and wall support of workshops, warehouses, locomotive depots, aircraft depots, exhibition halls, cinemas, stadiums, and market flower sheds

c-type machine host is 9 meters long, 1.1 meters wide and 1.6 meters high; The net weight is 6 tons. The frame is made of 350h section steel, the main shaft is made of 45 # round steel, and the wheel is made of bearing steel, which has been quenched and tempered. C-shaped steel is rolled by 14 rows of shafts and driven by sprocket, chain and planetary cycloid reducer. The motor power is 11kw-6 poles, and the production is 8-12 meters per minute. The front leveling of the leveling device adopts upper two and lower three; Rear leveling, one-to-one. The equipment adopts the form of external adjustment, which can be adjusted on one side. The adjustment speed is OK, and the operation is simple. Semi automatic equipment, automatic switch machine, automatic meter counting, cutting saw cutting; The fully automatic equipment includes all computer-controlled, automatic and arbitrary punching. This machine is equipped with a set of Uncoiler and a set of 6-meter discharge platform

c-shaped steel forming machine is a set of single roll forming machine that can produce various specifications of C-shaped purlin products. The machine mainly consists of passive loading frame, leveling device, punching device, cutting device after forming, hydraulic station, computer control system, etc. This machine adopts automatic flying saw punching, which is easy to operate

c-shaped steel products rolled by C-shaped steel forming machine have good tensile bending and compression performance, good flatness, fully automatic fixed length cutting, automatic punching, good degree of automation and convenient installation. The products can be used as the main stress structure of large and medium-sized industrial and civil buildings, such as roof load-bearing and wall flat support of workshops, warehouses, locomotive hangars, aircraft hangars, exhibition halls, cinemas, stadiums, and market flower sheds. Cold formed steel is the main material for making light steel structure, which is made of steel plate or steel strip by cold bending

c machine can make its wall thickness very thin, simplify the production process and improve the production efficiency. It can produce various sections with uniform wall thickness but complex cross-section shape and cold-formed sections of different materials that are difficult to produce by the general hot rolling method

c-type machine technical parameters:

equipment length 7600mm, width 950mm, height 1000mm

equipment power 11 kw, hydraulic station power 11 kw

the roll is made of bearing steel (Gr15) and annealed after forging

the base adopts 320 I-steel

use the lower five and upper four leveling to determine the flatness

secondary molding is adopted to determine the squareness and right angle of the product, and the size of the upper side can be made

the thickness of rolled material is 1.5mm-3mm (the thickness can also be designed according to user requirements)

the width of rolled C-section steel is 80mm-300mm

rolling speed 8-9m/min

new butt joint adjusting steel sleeve is adopted, which is simple and stable

the squareness of the equipment and C-section steel is the advantages of the same industry, such as the adjustable speed, fast punching, fast cutting, etc