-
Single layer tile press series
-
Double layer tile press series
-
Three layer tile press series
-
Floor bearing plate equipment
-
Glazed tile equipment series
-
Jiaochi equipment series
-
C/z/u-shaped steel forming mac
-
Carriage plate forming machine
-
Anti skid embossing equipment
-
Aluminum magnesium manganese 4
-
Ridge tile forming machine ser
-
Light steel keel machine serie
-
Shearing machine bending machi
-
Rock wool foam integrated sand
-
Rolling shutter door equipment
-
Discharge rack series of hydra
-
Export equipment series
-
Kaiping machine series
-
pipe benders
-
Customize cold bending equipme
![Door frame machine](/uploads/220624/1_1G033464.jpg)
Door frame machine
![](/enimage/dianhua.png)
The door frame machine uses galvanized steel plate or colored steel plate or aluminum plate of different colors as raw materials. The products produced are used to build the external roof and wall plates and internal decorative plates or ceilings of houses, so as to increase the beauty of roofs or walls. The door frame machine has the limit of production length, and can be produced according to the construction requirements! The surface of the finished product produced by the door frame machine is flat, smooth, flat and scratch free, which is convenient for construction and installation
characteristics of the molding die produced by the door frame machine:
1. The molding is quite natural and reasonable. All the molding dies have been strictly debugged by technicians
2. The arc is round enough, the plane is flat enough, the angle is sharp, the brightness is good after polishing, and the material surface is not damaged
3. The production of stainless steel forming molds has a high reputation and never cut corners. The process requirements for processing and forming molds are very high, and each process is very formal. It is controlled by measuring tools, such as length, outer diameter of excircle, and vernier caliper. When used, it is within 0.1mm, and the runout is within 0.05mm
4. The mold can be customized according to the customer's requirements. All the materials of the molding mold are GCr15, and all the materials are forged