1000 floor bearing plate equipment

The 1000 floor bearing plate equipment is mainly composed of a discharging machine, a feed introduction platform, a forming host, a punching device, a forming cutting device, a hydraulic station, a computer control cabinet, etc

the steel floor bearing plate produced by the 1000 floor bearing plate equipment has simple shape and large waviness. During installation, it is laid with spot welded reinforcement mesh and combined with the on-site pouring of concrete, with good adhesion. In high-rise buildings, steel formwork can be omitted and floor load can be reduced. On the premise of reaching the same bearing capacity, the amount of steel used in the project can be reduced, so as to save investment

1000 structure and use method of floor bearing plate equipment:

floor bearing plate profile is 0.8mm thick, 1.0mm thick, 1.2mm wide, 688mm~940mm, and 51 mm ~76mm high The engineering floor bearing plate and reinforced concrete structure act together, which is a composite structure

1000 floor bearing plate equipment operation and precautions:

manual blank setting and blank taking work procedure: before using the equipment, check whether the connections are stable, whether the mounting bolts and nuts are tightened, and add enough lubricating oil in the left and right chassis before powering on and starting the machine for test run. First, operate the machine empty and carefully observe whether there is vibration, noise, oil coming from the oil window, and whether the movements of all components are coordinated. Then install the mold, When installing the mold, cut off the power supply, manually move the motor belt or big gear to rotate the workbench and raise the sliding seat to the high point, so that an object can be supported between the workbench and the bottom surface of the sliding seat to prevent the sliding seat from falling naturally, causing an accident

1000 main characteristics of floor bearing equipment:

1. Adapt to the requirements of suitable construction speed of the main steel structure, can provide a firm working platform in a short time, and can adopt the flow construction of laying profiled steel plates on multiple floors and pouring concrete slabs in layers

2. In the use stage, the floor bearing plate is used as the tensile reinforcement of the concrete floor, which also improves the rigidity of the floor and saves the amount of reinforcement and concrete

3. The embossing on the surface of the profiled plate produces a large bonding force between the floor bearing plate and the concrete, so that they form a whole. With stiffeners, the floor bearing plate system has bearing capacity

4. Under the cantilever condition, the floor bearing plate is only used as a long-term formwork. The length of the cantilever can be determined according to the section characteristics of the floor bearing plate. In order to prevent the cantilever plate from cracking, negative reinforcement should be provided at the support according to the design of the structural engineer

specification of 1000 floor bearing equipment:

reeling width: 1000mm

loading weight: 6000kg

hydraulic power: 3kw

Motor Power: 3kw

inner diameter of oil cylinder: 120mm

working pressure: 10MP