-
Single layer tile press series
-
Double layer tile press series
-
Three layer tile press series
-
Floor bearing plate equipment
-
Glazed tile equipment series
-
Jiaochi equipment series
-
C/z/u-shaped steel forming mac
-
Carriage plate forming machine
-
Anti skid embossing equipment
-
Aluminum magnesium manganese 4
-
Ridge tile forming machine ser
-
Light steel keel machine serie
-
Shearing machine bending machi
-
Rock wool foam integrated sand
-
Rolling shutter door equipment
-
Discharge rack series of hydra
-
Export equipment series
-
Kaiping machine series
-
pipe benders
-
Customize cold bending equipme
![Double layer laminated rubber cotton board](/uploads/240607/100_11562W14.jpg)
Double layer laminated rubber cotton board
![](/enimage/dianhua.png)
The working principle of the double-layer rubber plastic cotton board tile pressing machine
The double-layer rubber plastic cotton board pressing tile machine is a mechanical equipment specifically used for producing double-layer rubber plastic cotton boards. Its working principle mainly includes the following steps:
Power transmission: Firstly, the electric motor drives the input shaft through a pulley, which is then driven by a small gear and a large gear to rotate the upper shaft.
Cam mechanism action: The rotation of the upper shaft drives the sliding seat equipped with the upper mold to move up and down through the cam mechanism, thereby achieving the compression of the rubber cotton board.
Mold positioning: At both ends of the upper shaft, there are return cams conjugate with the pressing cam, and the accurate positioning of the lower mold in the working position is achieved through positioning rods and positioning plates.
Lubrication system: In order to confirm the normal operation of the equipment and extend its service life, the double-layer tile press is equipped with a lubrication pump and oil circuit system. During machine operation, lubricating oil will be transported to various friction moving parts through oil pipes.
Control system: Double layer tile press machines usually use automatic control software with appropriate accuracy to achieve production information management. The automation control system of the entire unit adopts a highly integrated network, making the performance of the automation system better.
Operation and maintenance: The equipment is easy to operate, easy to maintain, and the mechanical debugging and mold replacement are also relatively easy. In addition, the lubrication pumps inside the chassis on both sides of the equipment will automatically lubricate all load-bearing bearings, transmission gear mechanism motion rails, and other parts during machine operation.
The design of the double-layer tile press aims to improve production efficiency and product quality, while reducing labor intensity and operating costs. Through accurate mechanical design and excellent control system, the double-layer rubber cotton board tile press can stably produce products that meet standards