-
Single layer tile press series
-
Double layer tile press series
-
Three layer tile press series
-
Floor bearing plate equipment
-
Glazed tile equipment series
-
Jiaochi equipment series
-
C/z/u-shaped steel forming mac
-
Carriage plate forming machine
-
Anti skid embossing equipment
-
Aluminum magnesium manganese 4
-
Ridge tile forming machine ser
-
Light steel keel machine serie
-
Shearing machine bending machi
-
Rock wool foam integrated sand
-
Rolling shutter door equipment
-
Discharge rack series of hydra
-
Export equipment series
-
Kaiping machine series
-
pipe benders
-
Customize cold bending equipme
![780 arc horizontal hanging plate manufacturer](/uploads/220831/100_1K100418.jpg)
780 arc horizontal hanging plate manufacturer
![](/enimage/dianhua.png)
Main technical parameters of 780 arc horizontal hanging plate:
1. Installation dimensions of tile press machine: (8500) 7500mm x 1300mm x 1200mm
2. Total weight of tile press: approximately 3500kg
3. Feed plate thickness: 0.25-0.8mm, feed width: 1000mm
4. Main power of tile press machine: 4kw, hydraulic shear power: 3kw
5. Hydraulic station pressure: 10-12mpa
6. Electric control system: The entire machine adopts industrial computer PLC control
7. Working speed of tile press: 8000mm/min
8. Material of the roller of the tile press: 45 # steel surface plated with hard chromium, hardness HR55 ° -57 °
9. The equipment rack is welded with 250 # I-beam, and the thickness of the middle plate is 12mm
10. Transmission method: Driven by a 1-inch chain, the sprocket is used for transmission.
11. Roller: diameter 70mm
12. Forming pass: 18 rows