840 flat double-layer equipment

The products produced by 840 flat double-layer equipment are widely used in the multi-storey and high-rise steel structure construction industry. 840 flat double-layer equipment includes: complete machine, PLC computer control system, shearing equipment and hydraulic system

The profiled plate rolled by 840 flat plate double-layer equipment is not only dignified and elegant, but also beautiful and novel, with flat appearance, uniform ripple and good production automation. 840 flat-panel double-layer equipment is mainly applicable to civil buildings of large and medium-sized enterprises, such as workshops, locomotive hangars, aircraft hangars, sports venues, exhibition halls, cinemas, etc

for the structure, performance and operating procedures of tile pressing machine and double-layer color steel profiled equipment, it is not allowed to start the machine at will. It is strictly forbidden to work beyond the small closing height, that is, the small distance between the bottom surface of the upper sliding box and each working surface is 290 mm. The height of the upper and lower molds after mold closing is required to be added, and the thickness of the upper and lower base plates plus the thickness of the tile blank is not allowed to exceed 290 mm. When manufacturing molds, they should be designed according to this requirement to avoid machine tool accidents. Always observe the height of lubricating oil in the sliding box and the bodies on both sides. The double-layer tile press equipment should be wiped frequently, kept clean, and there should be no mud and water. The color steel equipment has reasonable structure and convenient operation. It is a hydraulic press used to accurately shape and press the rough tiles extruded and cut by the vacuum screw extruder in the wet production of glazed tiles. It can be installed and used separately, but it needs manual loading and unloading. It can also be equipped with automatic loading rack and unloading manipulator, together with extruder, tile cutter, billet feeder and tile holder conveyor line to form a tile production line, which does not need manual operation

840 features of flat-panel double-layer device:

1. Two types of devices can be combined into one, that is, the floor area can be saved, and the double-layer cost is far lower than two single-layer machines, which is the user

2. Select automatic control software to complete production informatization

3. The automation control system of the whole unit adopts a highly integrated network, and the automation system has good functions

4. It has the advantages of operation, protection, mechanical debugging and simple die replacement

840 technical parameters of flat double-layer equipment:

machine weight: about 3.5 tons

forming shaft: diameter 70mm 45 # quenching and tempering

forming wheel: material 45 # forging and hard chromium plating

transmission mode: sprocket Chain

motor: 3kw forming row number: 9 rows

automatic computer fixed length cutting system:

pump station motor: 3kw four-stage

shearing die: Gr12

forming speed: 8-10m/min

pressing thickness: 0.2-0.7mm

pressing width: 1000mm