Stainless steel tile press

The stainless steel tile press has reasonable structure and beautiful appearance. It has the characteristics of space saving and simple operation, and is especially suitable for customers with small site and on-site construction

stainless steel tile pressing machine is to change between high and low racks. One kind of color steel plate with contour is installed on the low rack, and the roller of another kind of plate is installed on the high rack. A set of computer control system and a set of hydraulic shearing system are used in production

stainless steel tile press is mainly composed of feeding platform, forming host, forming shear device, hydraulic station, computer control system, etc

the operation of upper and lower layers is simple. You only need to control each layer through the conversion button on the electric control cabinet, and the power can also control each layer through the clutch

ordinary discharging machine and hydraulic discharging machine are optional

the models of the upper and lower layers are determined according to the customer's requirements

technical parameters of stainless steel tile press:

1. The main engine power motor is 380V, three-phase, 60hz

2. The girder is welded with 250mm H-shaped steel

3. The thickness of the middle plate is 14mm

4. The sprocket chain is 1 inch

5. Journal 70mm

6. The power unit adopts 4#3kw planetary cycloid reducer

7. The number of forming rows is 11 and 9

8. Hydraulic pump power motor 3KW

9. The computer PLC is delta brand. The cutting head is steel plate welding

10. The corrugating speed of finished products produced by the host machine is 8 meters per minute, and the daily output is 3840 meters in 8 hours

11. The peak height produced by the stainless steel tile press is h=25mm, the center distance between peaks is 210mm, and the service area is 840mm. The tile press can process plates with a large thickness of 0.8mm. The peak height of 950 product is h=15mm, the center distance between peaks is 225mm, and the effect is excellent. The use area is 900mm. The tile press can process plates with a large thickness of 0.8mm. The strength of colored steel tiles is directly related to the raw materials processed, such as thickness, product quality of raw material manufacturers, etc., so there is no fixed standard

12. The stainless steel tile press is a complete machine: the main machine is 5.5m long and 1.4m wide