1060-828 glazed tile double-layer color steel tile press

1060-828 glazed tile double-layer color steel tile press uses galvanized steel plate or color steel plate or aluminum plate of different colors as raw materials. The products produced are used to build the external roof plate and wall plate as well as the internal decorative plate or ceiling of the house, so as to increase the beauty of the roof or wall. There is no limit on the production length of the glazed tile press production line. Multiple groups of different data can be set on the computer controller according to the construction requirements. After one key "confirm", the equipment will automatically produce finished products of different lengths according to the data set by the computer. The finished surface produced by the glazed tile press production line is flat, smooth, flat, and free of scratches, which is convenient for construction and installation

1060-828 glazed tile double-layer color steel tile press adopts a new hydraulic cutting system, which includes forming host, hydraulic station, feeding rack, forming shear, control box and discharging rack

the antique glazed tiles formed by the rolling die of 1060-828 glazed tiles double-layer color steel tile press have the characteristics of beautiful appearance, simplicity and elegance, exquisite and unique shape, excellent taste and so on. They can be widely used in garden factories, tourist scenic spots, pavilions, hotels, villas, exhibition halls, resorts, families and other buildings and outdoor decoration

before using the 1060-828 glazed tile double-layer color steel tile press, check whether the connections are stable, whether the mounting bolts and nuts are tightened, and add enough lubricating oil in the left and right chassis before powering on and starting the machine for commissioning. First, operate the machine empty and carefully observe whether there is vibration, noise, oil coming from the oil window, whether the movements of all parts are coordinated, and then install the mold. When installing the mold, cut off the power supply, Manually move the motor belt or big gear to rotate the workbench and raise the sliding seat to the high point, so that an object can be supported between the workbench and the bottom surface of the sliding seat to prevent the sliding seat from falling naturally, causing an accident. The mold used by this machine requires an upper mold and six lower molds with the same specification and size. First, install the upper mold and a lower mold. The lower mold is directly installed on the hexagonal runner workbench, and the upper mold is installed on the bottom surface of the sliding seat, with a suitable thickness of backing plate placed. After the upper and lower molds are closed, the gap around them is uniform, and the distance between the upper and lower molds is equal to the thickness of the required tile blank. Then, the upper mold shall prevail, the workbench shall be rotated, and the remaining five sets of lower molds shall be installed. After all the upper and lower molds are installed, the tile pressing can be started

1060-828 glazed tile double-layer color steel tile press technical parameters:

overall dimension of feeding rack: 5800mm long × 1350mm wide × 1200mm high

the maximum speed of the forming machine: 6m/min

the thickness of the formed color steel plate: 0.5-0.8mm

the expanded width of the formed color steel plate: 1000mm

the width of the formed glazed tile: 828mm, deviation ± 1/100

the wave height of the formed glazed tile: 28mm, deviation 28-0.3

roll shaft diameter: Φ 70mm

computer operation panel, text screen