-
Single layer tile press series
-
Double layer tile press series
-
Three layer tile press series
-
Floor bearing plate equipment
-
Glazed tile equipment series
-
Jiaochi equipment series
-
C/z/u-shaped steel forming mac
-
Carriage plate forming machine
-
Anti skid embossing equipment
-
Aluminum magnesium manganese 4
-
Ridge tile forming machine ser
-
Light steel keel machine serie
-
Shearing machine bending machi
-
Rock wool foam integrated sand
-
Rolling shutter door equipment
-
Discharge rack series of hydra
-
Export equipment series
-
Kaiping machine series
-
pipe benders
-
Customize cold bending equipme
![750 floor bearing plate equipment](/uploads/220607/1_144U6450.jpg)
750 floor bearing plate equipment
![](/enimage/dianhua.png)
The 750 type floor bearing plate equipment is hydraulically driven and automatically cut off after forming, without deformation and waste. The coefficient is high (the main machine stops cutting). The floor bearing steel plate produced is used for the floor slab, which has the characteristics of high wave crest, and the degree of production automation is good. The steel floor bearing plate produced by this machine has simple shape and large waviness. When installing, it is laid with spot welded reinforcement mesh and combined with concrete on-site pouring, with good adhesion. In high-rise buildings, steel formwork can be omitted and floor load can be reduced. On the premise of reaching the same bearing capacity, the amount of steel used in the project can be reduced, so as to save investment
750 type floor bearing plate equipment (steel bearing plate, building profiled steel plate) is formed by rolling and cold bending of galvanized steel plate, and its section is formed into V-shaped, U-shaped, trapezoidal or similar waveforms. It is mainly used as a template, and can also be selected for other purposes
750 floor bearing plate equipment features:
1, light weight, large load-bearing, stable performance
2. Simple construction and convenient assembly
3. Replace the traditional template and improve the shortcomings of the traditional template
4. It can be used as a part of structural strength to reduce material costs
5. It is easy to construct reinforcement, wiring and piping
6. The appearance is neat and beautiful
precautions for the use and operation of 750 type floor bearing plate equipment:
750 type floor bearing plate equipment meets the requirements of suitable construction speed of the main steel structure, can provide a firm working platform in a short time, and can adopt the flow construction of laying profiled steel plates on multiple floors and pouring concrete slabs in layers
in the use stage, the floor bearing plate is used as the tensile reinforcement of the concrete floor, which also improves the rigidity of the floor and saves the amount of reinforcement and concrete
the embossing on the surface of the profiled plate produces a large bonding force between the floor bearing plate and the concrete, so that they form a whole. With stiffeners, the floor bearing plate system has bearing capacity
under cantilever conditions, the floor bearing plate is only used as a formwork. The length of the cantilever can be determined according to the section characteristics of the floor bearing plate. In order to prevent the cantilever plate from cracking, negative reinforcement should be provided at the support according to the design of the structural engineer