10feng 900 single-layer tile press

The 10feng 900 single-layer tile press can be installed and used separately, but it requires manual loading and unloading. It can also be configured with automatic loading rack and unloading manipulator and extruder, color steel tile cutting machine, billet feeding machine and tile holder conveying line to form a tile production line, which does not need manual operation. The machine is mainly composed of left and right machine bodies, bottom connecting rods, top case cover, sliding seat, hexagonal runner, belt pulley, gear mechanism, sheave mechanism, cam mechanism, lubrication pump, oil circuit system, electric control part, etc

10 technical parameters of peak 900 single-layer tile press:

overall dimension of equipment installation: 6000mm × 1300mm × 1200mm

total weight of equipment: About 3000kg

width of incoming plate: 1000mm

thickness of incoming plate: 0.2-1.0mm

forming passes: 10

electric control system: all controlled by industrial computer PLC

working speed: 8000mm/min

host power: 3kw hydraulic plate cutting power: 3kw

pressure of hydraulic station: 10-12mpa

area after forming: 900mm scale: 15mm pitch: 900mm 225mm

tile press roll material: 45 × steel table Hard chromium plating on the surface, hardness hr55 ° -57 °

normal working noise of tile press is not more than 75db (a)

transmission mode: sprocket, chain

shear die: Gr12

pressing thickness: 0.2-0.7mm

pressing width: 1000m