-
Single layer tile press series
-
Double layer tile press series
-
Three layer tile press series
-
Floor bearing plate equipment
-
Glazed tile equipment series
-
Jiaochi equipment series
-
C/z/u-shaped steel forming mac
-
Carriage plate forming machine
-
Anti skid embossing equipment
-
Aluminum magnesium manganese 4
-
Ridge tile forming machine ser
-
Light steel keel machine serie
-
Shearing machine bending machi
-
Rock wool foam integrated sand
-
Rolling shutter door equipment
-
Discharge rack series of hydra
-
Export equipment series
-
Kaiping machine series
-
pipe benders
-
Customize cold bending equipme
840 bearing steel wheel - pressed stainless steel
840 bearing steel wheel pressing stainless steel veneer machine can produce roof panels with different appearances according to production needs. The formed plates rolled by the machine have flat appearance, uniform ripple, good utilization rate, good strength, good production automation and good yield. The products are mainly applicable to civil buildings of large and medium-sized enterprises, such as workshops, locomotive hangars, aircraft hangars, sports venues, exhibition halls, cinemas, etc
840 bearing steel wheels - press stainless steel veneer machine for correct operation:
1. Before operation, wear tight protective clothing, fasten the cuffs, and do not open the hem of the jacket. Do not wear, take off or change clothes near the starting machine tool, or wrap it around the body to prevent the machine from being twisted. Wear a stable cap. The braid should be put into the cap. Skirts and slippers are not allowed. All parts of the color steel tile press should be lubricated frequently. The operator should fill the lubricating oil once every shift, and the mechanic should fill the lubricating oil on the rolling bearing once every six months
2. The color steel tile pressing machine is applicable to the production of all kinds of steel plates, aluminum plates and metal plates with material thickness of the rated value of the machine tool, and it is not allowed to exceed the thickness if there are no hard marks, welding slag, slag inclusion and weld materials
3. Usage of color steel tile press:
a. adjust the gap of roller according to the thickness of production material
b. The color steel tile press can be operated for 1 - 3 minutes before operation, and can be produced only after it is normal
c. there will be differences in the width after replacing the steel coil. Adjust the width of the feeding baffle in time, and the tightness is appropriate
840 bearing steel wheel - technical parameters of stainless steel veneer press:
installation size: 6500mm × 1200mm × 1500mm
number of forming passes: 11 passes
roller material: 45 # steel
roller plating thickness: 0.05mm
cutter material: Cr12
forming speed: 9-10m/min
frequency converter: accurate counting, knife prevention function (optional)
host power: 3kw equipped with No. 4 planetary pendulum reducer
hydraulic station power: 3kw
plate thickness: 0.3-0.8mm
plate spreading width: 1000mm
frequency converter (optional)