-
Single layer tile press series
-
Double layer tile press series
-
Three layer tile press series
-
Floor bearing plate equipment
-
Glazed tile equipment series
-
Jiaochi equipment series
-
C/z/u-shaped steel forming mac
-
Carriage plate forming machine
-
Anti skid embossing equipment
-
Aluminum magnesium manganese 4
-
Ridge tile forming machine ser
-
Light steel keel machine serie
-
Shearing machine bending machi
-
Rock wool foam integrated sand
-
Rolling shutter door equipment
-
Discharge rack series of hydra
-
Export equipment series
-
Kaiping machine series
-
pipe benders
-
Customize cold bending equipme
V125-750 horizontal hanging plate tile press
V125-750 horizontal hanging tile press is used for roof production of various industrial plants and warehouses. It has the advantages of high wave crest and lap installation. The profiled plate produced by v125-750 horizontal hanging tile press solves the roof leakage problem of conventional series of profiled plates. It can be used to produce 750 color tile machine of beamless arched roof with arch springing machine
v125-750 horizontal hanging plate tile press includes: complete machine, PLC computer control system, shearing system, hydraulic system. The products produced have flat and beautiful appearance and uniform paint lines. They are widely used in industrial and civil buildings, such as factory buildings, warehouses, locomotive hangars, aircraft hangars, gymnasiums, exhibition halls, cinemas and other rooms and walls
v125-750 horizontal hanging tile press uses galvanized steel plate or colored steel plate or aluminum plate of different colors as raw materials. The products produced are used to build the external roof plate and wall plate of the house, as well as the internal decorative plate or ceiling, with the characteristics of beautiful appearance, simplicity and elegance, exquisite and unique shape, taste and so on
v125-750 horizontal hanging plate tile press has no limit on the production length. Multiple groups of different data can be set on the computer controller according to the construction requirements. After one click "confirm", the equipment automatically produces finished products of different lengths according to the data set by the computer. The surface of the finished products produced by this production line is flat, smooth, flat and scratch free, which is convenient for construction and installation
The profiled plate rolled by v125-750 horizontal hanging plate tile press is solemn and elegant, beautiful and novel, with flat appearance, uniform ripple, good utilization rate, high strength, good production automation and low costv125-750 horizontal hanging plate tile pressing machine technical parameters:
overall dimension: 5100mmx1400mmx1000mm
forming method: roll forming (pre pressing)
electric control system: PLC frequency conversion control of industrial computer is adopted
motor power: 3kw
production speed: 0-9m/min
purpose: roof panel
applicable plate thickness: 0.25-0.8mm
plate expansion width: 1000mm
shear knife material: Cr12 (Chrome 12)
equipment transmission: 3/4 sprocket, chain
v125-750 horizontal hanging tile press roll formed profiled plate is used for roof production of various industrial plants and warehouses. It has the advantages of high wave crest, high strength, lap installation, good performance and so on. The profiled plate produced by 750 horizontal hanging tile press solves the roof leakage problem of conventional series profiled plate, and can be used to make beamless arched roof with arch springing machine
v125-750 horizontal hanging tile press commissioning:
1. First measure the height of the front and rear four corners of the 750 horizontal hanging tile press from the gantry to the upper end of the shaft, find a line to straighten, check whether the lower shaft is in a straight line, and adjust the left and right sides of the lower shaft to be horizontal
2. Tighten the lock nuts on both sides, pull a straight line in front of and behind the middle wheel, and adjust the gap between the upper and lower shafts, then the machine can be adjusted along the straight line
3. The debugging method of the deviation of the pressing plate of the 750 horizontal hanging tile press, such as running the plate to the right, padding the left corner (feeding rack), or falling to the right bottom level (the axis deviates and falls to the bottom level of the axis, and the upper axis falls with the bottom axis.