Characteristics and types of tile press

Before using the tile press, check whether the connections are secure, whether the mounting bolts and nuts are tightened, and add enough lubricating oil in the left and right chassis before powering on and starting the machine for commissioning. First, operate the machine empty and carefully observe whether there is vibration, noise, oil coming from the oil window, whether the movement of all parts is coordinated, and whether the diversity is normal before installing the mold. When installing the mold, cut off the power supply and manually move the motor belt or big gear, The tile press rotates the workbench and raises the sliding seat to the high point, so that an object can be supported between the workbench and the bottom surface of the sliding seat, so that the sliding seat can fall naturally, causing an accident. The mold used by the tile pressing machine requires an upper mold and six lower molds with the same specification and size. First, install the upper mold and a lower mold. The lower mold is directly installed on the hexagonal runner workbench, and the upper mold is installed on the bottom surface of the sliding seat, with a cushion plate of appropriate thickness placed to protect the upper and lower molds. After the upper and lower molds are closed, the four peripheral gaps are even, and the distance between the upper and lower molds is equal to the thickness of the required tile blank. Then, the upper mold shall prevail, the workbench shall be rotated, and the remaining five sets of lower molds shall be installed. After all the upper and lower molds are installed, the tile pressing can be started

three characteristics of tile press:

1 The tile pressing machine also has the advantages of operation, maintenance, maintenance, mechanical debugging and easy die replacement

2. The automatic control system of the whole unit adopts highly integrated network, which makes the automatic system have excellent performance

3. The tile press adopts high-quality automatic control software to realize production information management

tile press can be roughly divided into three types, with their advantages and disadvantages as follows:

1 Rolling forming tile press: due to the single rolling production shape, the low quality of tiles has gradually faded out of the market

2. Extrusion molding color tile press: good output, suitable speed, but too high investment

3. Mold color tile press: at present, most of the excellent color tile press models adopt Mitsubishi PLC control system, mainly including hand touch screen and digital display. The mold is made of special steel, with good practicability and long service life