Key points of glazed tile machine production process and characteristics of control system

The pressing part of glazed tile equipment is that the hydraulic cylinder drives the mold to move up and down, which can press the colored steel into many sections, like glazed tiles. The cutter part is driven by the hydraulic cylinder to move the cutter up and down, which can cut off the colored steel tile

production process of glazed tile equipment: the colored steel plate enters the forming part of the roller table. After forming, it reaches the pressing part and is pressed into sections with equal distance. The cutter is responsible for cutting with fixed length

the executive part of the glazed tile machine has a frequency converter drive motor, a hydraulic station motor, two hydraulic solenoid valves for pressing, and two hydraulic solenoid valves for cutting knife

glazed tile equipment detection part: pulse encoder for detecting the length of colored steel tile, profiled up and down travel switch, knife up and down travel switch, profiled up and down operation button, knife up and down travel button, emergency stop switch, hydraulic start and stop switch, etc

plc adopts KDN-K3 series. It has 14 inputs /10 relay outputs, which just meets the input and output requirements. With KDN text screen, you can complete parameter setting, help information, production data and so on

glazed tile equipment has many parameters to set, which can be set with text screen. There are two kinds of parameter settings: device parameter and user parameter. Equipment parameters include: single pulse length, overshoot, pressing distance, pressing time, cutting time, etc. User parameters: number of sheets, length, section, last section, pitch, number of sections, etc

second, the characteristics of the control system of the glazed tile forming machine

the glazed tile forming machine is divided into three parts, roller forming part, pressing part and cutter part. The forming part of the roller table is driven by the motor, and the chain drives each roller to rotate. The pressing part is driven by the hydraulic cylinder to move the mold up and down, which can press the colored steel into many sections, like glazed tiles. The cutter part is driven by the hydraulic cylinder to move the cutter up and down, which can cut off the colored steel tile. The production process of the glazed tile forming machine is as follows: the colored steel plate enters the roller forming part, and after forming, it goes to the pressing part, which is pressed into sections with equal distance, and the cutter is responsible for the fixed length cutting

the glazed tile forming machine should use the high number pulse input function. The high number input performance is excellent, and ab phase is selected for anti-interference. And use the constant value interrupt function to improve the accuracy. Glazed tile molding machine has many parameters to set, set with the text screen. There are two kinds of parameter settings: device parameter and user parameter. Equipment parameters include: single pulse length, overshoot, pressing distance, pressing time, cutting time, etc. User parameters include: number of sheets, last section, pitch, number of sections, etc