Explanation and operation process of C-type steel machine workbench operation

C-shaped steel machine is fully automatic feeding, and the procedure flow in the billet taking work: the mold shell assembly and server trial run are the same as above, and then turn on the air compressor, mechanical pump, extruder, tile cutter, feeding machine, color steel tile press, server and tile holder belt conveyor. When stopping, stop the extruder first, and then stop other equipment. 2) The procedure flow in the work of manually making, releasing and taking blanks: before the application of the equipment, it is necessary to check whether the connection of various places is firm, whether the installation of anchor bolts and nuts are tightened, and the upper and lower main engine boxes should be filled with moisturized automobile oil before inserting the electric starter to carry out the trial operation. First, the air switch operation should be carried out to carefully observe whether there is surprise, noise, whether the oil channel is oil, and whether the mud billet extruded by the extruder is cut into a fixed length by the automatic cutting machine, It is sent to the color steel tile press by the roller bearing belt conveyor, and then sent to the upper mold by the feeder according to the division procedure

is drawn by the vacuum suction cup of the pressure relief tile machine and belongs to the seventh chord, which is placed on the tile holder of the conveyor. Production process of C-shaped steel equipment: hot rolled strip is sent from the end of the equipment, and then sent out from the top of the roof through various rollers

in traditional handicrafts, after the color steel roof is formed, people carry out fixed length sealing control, and then transport it to the punching machine equipment to open holes according to the specifications required by users. The production cannot be sustained and the efficiency is not high. The technical staff of the enterprise and the equipment manufacturers closely cooperate with each other, gradually change the production and processing technology, complete the automatic control system of the whole process of the whole processing technology, rapidly develop the production efficiency, and improve the scientific and technological content and added value of customer equipment

the thickness of C-shaped steel equipment can be made very thin, which simplifies the production and processing process and develops production efficiency. It can produce all kinds of cold drawn color steel equipment with uniform thickness but complicated cross-sectional appearance design and different materials that cannot be produced by the general hot-rolled method